Vapor Blasting Equipment For Contractors
Vapor blasting is a unique combination of abrasives and water. Water coolers cool the surface of the media while the abrasives remove surface heat, removing frictional heat, shrinking surface warping, and removing heavy coatings ten times faster than traditional wet blast cabinets. The Vapor King, by Bob Price, allows professional users to make full use of these benefits of vapor blasting equipment. The Vapor King features a stainless steel mixing tank with dual adjustable air flow. If you want to find out what is vapor blasting, visit this page.
The Vapor Blasting Equipment consists of two components: an air handler that mixes the media with the air, an abrasives collector that serves as a cooler, holding the solution. To get maximum effect, the mixture must be circulated through the collector and then into the spray nozzles at the appropriate intervals. For best results, a minimum of eight meters of air space should be available in the mixer tanks. Users should also consider using stainless steel mixing tanks, as stainless steel is often much easier to maintain and weld.
Most outdoor wet vapor blasting equipment is manufactured in the traditional two-stage wet/dry method. A two-stage system requires two separate chambers, one filled with sand and grit and another with the slurry or sludge. The second chamber can be left free of sand or grit to ensure proper mixing. The two chambers are connected by metal tubing to a control box. The valve required to open the valves is usually a spring clip, which is opened by pulling up a lever.
To ensure proper equipment performance, it is recommended that the mixing and spraying media be mixed on a two quart steel bowl, with the mixing drum having a one-quat face. It is not advisable to use any larger bowls as the jets could be concentrated. Another useful addition to outdoor vapor blasting equipment is a power sprayer. Power sprayers are available in both wet and dry styles and function in a similar fashion. Both employ pumping action to release the abrasives and a rotary wand or brush to clear away any excess.
One popular application is used by concrete contractors, who often apply concrete sealers and concrete polishes using a wet blast system. Wet blasting is less expensive than dry blasting and produces identical results. When using a wet blast system, it is recommended to provide at least three minutes of water time between each spray. Water time allows the chemical to react with the slurry and create a safer working environment for all users. Users should ensure they do not exceed the maximum flow rates indicated on the manufacturer's product literature, as excessive flow rates can cause damage to the nozzle.
A vapor blasting machine is an essential tool for today's contractors who perform multiple projects. It is important to ensure the proper equipment is purchased for the job. When selecting a vapor king cabinet, it is important to match the appropriate equipment to the project and the expected workload. In most cases, it is advised to consider the strength of the hose, the pressure inside the cabinet, the diameter of the nozzle and the size and shape of the cupcake tumbler used in the application. This page: https://en.wikipedia.org/wiki/Sodablasting highlights more info about this topic, check it out.
